The equipment is an automated workstation to assemble sets of catheters in several versions with the application of its own unique system of wire removal from a bulk bundle. A total number of five robotic manipulators are used to handle the individual components, to...
Projects
Banding equipment
It is an installation of a collaborative robot on a workstation for removal of parts at the output from an injection moulding machine and their automatic banding in sets of several pieces. The parts come out of the press stacked in a specified number and in a random...
Equipment for dilution and distribution of slurry
The equipment is used to dilute process chemicals in course of semiconductors manufacture. Dilution is carried out in an automatic mode with deionised water in a mixing hydraulic loop by means of dosing adjusted ratios of chemical and water into a mixing tank. The...
Equipment for vertical etching
The equipment is used to clean tubes and fixtures made from silica glass by etching. The equipment has two separate etching chambers, which make it possible to process tubes and fixtures up to 2200 mm in height in vertical position. The chemicals used are HNO3, HF and...
Equipment to glue doors
The equipment is designed as a single-purpose semiautomatic line to glue stainlesssteels stripes with putty on the glass of doors. The operator will place manually the glass and stainless-steel stripes with putty into the equipment and will trigger the process....
Automated loading of wires SWG2
The equipment is a single-purpose robotized workstation which is used for automatic preparation of material for the follow-up equipment in manufacture of medicinal tools. The wires are placed by the operator in a larger quantity into a bin in the input station of the...
Equipment for pigtail heat treatment
The equipment is used in the health service, specifically to shape stents used for urological purposes. “Pigtail”-type stents are placed on trays and manually loaded into the machine. The trays are heat-treated by warming up and by subsequent cooling down by means of...
Crushing equipment for delay compositions
The equipment is designed to crush material for manufacture of industrial pyrotechnic compositions and is designed for use in areas with risk of explosion. The incoming material is poured into a hopper at the upper part of the equipment wherefrom the material is...
Labelling machine
The labelling station is an automatic module designed for use in a packaging line. Labels are applied to the paper boxes from all four sides with a possibility of sticking the label over the edge of the box. A pair of narrow belt conveyors with independent drive run...
Manual Chemical Boxes
A set of six identical chemical boxes to etch and wash silicon wafers of 150 - 200 mm in diameter under laboratory conditions. Tubs for chemical processes are manually operated, temperature of the PVDF tub is controllable. Rinse tubs are equipped with automatic quick...
A hood to develop photolithographic structures
A hood for laboratory purposes and for work with inorganic and organic acids. Tubs for chemical process are manually operated and individual waste chemicals are collected into separate boxes. The hood is connected to a central distribution system for nitrogen, vacuum...
Filling equipment
The cartridge filling device is a single-purpose device used in health service. Containers are manually loaded into the machine and filled with three different medical solutions. The equipment is designed for work in clean rooms as per ISO 14644-1, class 8. HIGHLIGHTS...
Washing line
This single-purpose equipment is used for the manufacture of electrotechnical components. The material in trays placed in the basket is placed on a motor-driven incoming conveyor belt which will transport it into the washing chamber. An internal manipulator transfers...
Equipment to process SIM cards
This single-purpose device equipment ensures automatic processing of SIM cards in many operations. Starting from software uploading, through communicating with the provider’s database, inserting into paper envelopes, inserting of package leaflets, marking with bar...
Jet Etch Machine
The machine is designed as a single-purpose piece of equipment for clean rooms in semiconductor industry. The machine provides jet etching, washing and edge drying of silicon wafers for power switches. The equipment consists of two chambers with controlled flow of the...
Acid Clean Line
A single-purpose equipment used for the manufacture of electrotechnical components, specifically for their rinsing in acid baths, rinsing and baking at temperatures up to 500 °C. Material placed in metal trays is manually loaded into the input station. The trays from...
Termination Automatic Line
The equipment is used in the electrical engineering industry. It is a robotized line for chemical treatment of electronic components. Two six-axis robots, supplemented with the seventh axis in the form of a 24 m long linear track, ensure the placement of components...
Table tampo-print 360°
The table tampo-print 360° is a minor single-purpose device for printing catheters which are used in the health service. Catheters are loaded manually into the bed under a transparent cover. The ink is transferred on the catheter using a swab which subsequently rolls...
Thermovent paper coating
The paper coating production line Thermovent treats paper in liquid baths for further use of the paper in the health service. As the equipment is symmetrical, the paper can pass through the line from the right to the left as well as from the left to the right, which...
Machine for Si-wafers processing
Is a space-saving device designed for cleaning and etching of the silicon wafers. Device Features: Used materials comply with the FM4910 standards Etching and rinsing bath. One to three storage positions. Fully automated; Automatic transport of the Si-wafers to the...
Pin welder and stamper
The equipment is a manned automatic workstation designed to manufacture an intermediate product which is used in healthcare. Incoming material is represented by a pouch welded from a foil and a plastic pin is welded into the pouch by the equipment and the equipment...
Welding station
The device is designed for serial production of disposable medical aids. As far as the technology is concerned, it is an automated station to weld two plastic parts by means of induction heating. The welding unit is placed on a precise linear guidance system with...
Conveyors to clean rooms with an air draught barrier
The assembly is composed of three follow-up conveyors and is used for automatic transport of products from clean manufacturing rooms into the rooms for packaging. The conveyors number 1 and 2 are located in clean rooms and the output conveyor number 3 is located in an...
Equipment to measure the length of chopped profiles
The automatic equipment is used to check the length of chopped rubber profiles. Individual parts are transported to the machine from the preceding cutting machine by means of a continuous three-sided conveyor belt. The length of the profile is measured during the...
Catheter Connector Automation
The equipment is used for fully automated assembly of the Epifuse Catheter Connector. The assembly is a product for medical purposes and consists of two parts: Body and Cap. There are several versions of parts which are used for the assembly and presence of proper...
Ingot cleaning line
The automatic equipment is used to etch and clean monocrystalline silicon ingots in the semiconductors manufacturing. Individual ingots of cylindrical shape are placed in a basket on the incoming conveyor belt. Having the cover of the incoming conveyor belt been...
Pressure resistant tester 2x 400 MPa
The automatic testing equipment is designed for destructive tests under high pressure up to 400 MPa. It is built as a stable welded cabinet made from ground stainless steel wherein two high-strength test chambers are built. The chambers may be used alternately, the...
Manual Cleaning Line for Wafers Etching
The equipment is a chemical box to clean and etch monocrystal silicon wafers in the chemical SC-1 and in hydrofluoric acid. The operator places baskets with silicon wafers of diameter equal to 4 up to 8“ into individual tubs. Having the required etching time been...
Distribution System for EBR Chemical
The equipment is used to store and automatically distribute the flammable and potentially explosive chemical EBR in a semiconductors production. There are two high-capacity storage tanks in a supply station located out of the production building. From the station, the...
Chemical Boxes AWAP For HF Mixtures
The equipment is designed to etch Si plates in manufacture of semiconductors. It is designed as a stand-alone chemical box. The etching is done by means of chemicals based on hydrofluoric acid. All materials used are chemically resistant and they meet the requirements...
Automatic Box for Microstrip
The machine is designed as a single-purpose automatic box to etch Si plates. The cycle of etching and rinsing the Si plates is fully automatic according to the selected parameters, the operator only replenishes the incoming material, takes products and selects the...
Automatic Line for Etching Chips
The equipment is a set of four chemical sections interconnected in a manufacturing line. The line makes it possible to carry out an automatic comprehensive chemical procedure on wafers from monocrystalline silicon. The procedure typically consists of etching sequences...
A machine to unravel knitwear
The machine is designed as a single-purpose automatic line to unravel textile knitwear for a company which manufactures clothes. The machine is automatic, with minimum attendance by operators. Individual processes take gradually place in the machine. The knitwear is...
TMAH
Zařízení je určeno pro ředění a distribuci chemikálie TMAH. Výsledná směs TMAH 2,38% je tvořena mícháním Tetramethylammonium hydroxidu (TMAH 25%) a deionizované vody (DI voda). Systém se skládá z vnitřní míchací smyčky a distribuce. (zařízení pracuje v ČR pro...
Heat Treatment Equipment
A heat-treatment device to treat AC ampoules with hot water is designed as a single-purpose, semiautomatic, permanently manned device. The working process is managed by means of a Programmable Logic Controller and by means of a HMI display unit and by means...
Lord Automation
The machine is designed as a single-purpose automatic piece of equipment to manufacture medical consumable material. The machine assembles and tests a special product named "Loss of resistance device - syringe", similar to a syringe. The following processes take...
Spin Etcher
References on request
Threading machine
The threading machine is a single-purpose machine to make threads M4 in automatic cycles managed by one person. The machined parts are represented by two types of metal hose clamps. The operator clamps always two pieces of the same type of the part into a fixture...
Gas pouch filling machine
The machine for filling aluminium pouches with gas and for their subsequent welding in the manufacture of medical consumable material is designed as a single-purpose, semiautomatic, permanently manned machine. The working process is managed by means of a Programmable...
U-cell
The equipment is used in the manufacture of medical consumable material as a single-purpose service workplace for the stand-alone machine Cassette Welder. The equipment is formed by three work desks which form a U-shaped production line and the equipment is...